This automatic optical Fiber tensile testing program is designed for operator skill impartial utilization in creation and lab configurations. Two fundamental design designs permit the consumer to pick between a set up for regular linear Proof testing and with extra mandrels for rotary higher power screening.
The linear version is designed for production Proof screening with causes as much as 22 N. Motor-driven clamps with carefully designed rubber inserts be sure that the Fiber Drawing Machine will not be damaged inside the testing process whilst at the same time getting rid of the necessity for an external air supply. Degrees of pulling force, tugging speed and hold time are automated and easily accessible to the operator with the built-in Liquid crystal display touch-screen control. Data from tests can be stored and reached via the USB port or Ethernet user interface.
Mandrels of the same design as in NYFORS’ optical Fiber recoaters can easily be mounted on the Proof tester inside the rotary higher strength settings. The Fiber is wrapped round the two mandrels which assistance it having a special clamping mechanism. By doing this higher lots can be employed onto the Fiber, enabling breaking up power tests below controlled conditions.
Changeable clamp placement facilitates screening with all the highest force amounts as well as testing of short Fiber measures. The lightweight and light weight design definitely makes the instrument simple to maneuver in a lab environment and to incorporate in a creation work table in which space are at a premium. The device is really a lightweight and light-weight tool perfect for screening the potency of visual fibers approximately 30 N. The device is created to meet all kinds of applications in which a power check must be carried out.
The device is designed with all the user in mind. The Secondary Coating Line is easily put into the guided linear clamps, and also the testing begins automatically using a “One Touch” go button. The built-in microprocessor regulates all of the essential parameters like pulling force, pulling velocity and hold time. This enables to get a completely managed test every time.
The equipment can be connected to an external PC, which allows usage of all automated guidelines and settings. The equipment is tailored to face-alone use or to the incorporation into various subsystems. The device has an extensive capacity for signing and conserving details such as tugging force, pulling speed and Fiber diameter and other parameters.
Two recoat injector configurations can be purchased. The PTR307 utilizes an automated pump to inject the recoat material. The amount of materials dispensed by the automated injector is managed by hand using the top-mounted “Inject” button or programmed into the device making use of the tablet controller. The PTR307B features a handbook recoat shot program that needs the user to manually distribute the recoat material in to the mold cavity; another one injector for your PTR307B recoater is accessible listed below. Please note that this automated injector is just compatible with high-directory recoat materials, while the handbook injector is compatible with both reduced- and high- index recoat material; both are sold individually below. Please contact Tech Assistance for additional information.
he handbook injector can be mounted to suitable Fiber recoaters via the 4-40 anchoring screws on the recoater housing (see photo for the right). Utilize a 3/32″ hex key to secure the injector just before use. To connect the PTRRRM towards the recoater mold, tighten up the connector at the end of the green plastic material tubes, then release by way of a 1/4 turn to permit rotation.
The injector is equipped with a syndication device and 2-place choice handle for directing the flow of recoat materials. A knurled dispensing screw having an internal plunger works as a syringe for your recoat material. To fill the syringe, point the lever downward (i.e., toward the recoat bottle), then rotate the knurled dispensing attach counterclockwise till it rotates easily to fill the syringe (shown within the photo to the right). Then, to inject the recoat material into the mold, point the handle horizontally (i.e., dealing with qyjflh knurled attach) and spin the attach clockwise till near the end in the journey range is reached. Avoid bottoming out the dispenser since this may damage the internal plunger; also be mindful when re-interesting the threads to avoid go across threading the dispensing screw. A number of fill/inject actions may be needed till air is displaced inside the system. Use lens cells as well as an acetone or alcoholic beverages cleaning solution to collect Optical Fiber Proof-Testing Machine material that runs through the mold.